Polls the docker-build / web-wasm-rebuild workflow runs and prints a
compact status block until the newest deploy is live. Reads the API
token from ~/.config/tea/config.yml and never prints it.
Closes#119
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Resolves the Draw-1 recycle question from the June 500-game audit:
unlimited recycling with upstream score penalties is deliberate,
matching mainstream digital solitaire rather than strict 3-pass
tournament rules. The difficulty seed catalog and the winnable-deal
solver are verified under this rule, so a hard pass limit must not be
introduced casually.
- ARCHITECTURE.md: new 'Rules decisions' note in the solitaire_core
section
- GameState::draw() doc comment points at the decision record
- New lock-in test draw_one_recycling_is_unlimited_by_design asserts
10+ recycles are never rejected
Closes#117
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
refresh_insets gated its loop on insets.is_populated(), so once insets
resolved at first launch, rearm_on_resumed's poll-counter reset was a
no-op and JNI was never queried again. Insets that changed while the
app was backgrounded (fold/unfold, rotation, gesture/3-button nav
switch) stayed stale until process restart.
Gate the loop on the poll counter alone and settle a cycle by
exhausting it once a populated reading arrives. The cached resource is
rewritten only when the value actually differs, so resumes where
nothing moved trigger no change detection and no relayout — preserving
the no-flash resume behaviour. Also correct the stale on_app_resumed
doc that still described the old inset-zeroing approach.
Closes#116
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MAX_DYNAMIC_FAN_FRAC 0.6 -> 0.9 so the dynamic tableau fill spreads
further on very tall / narrow viewports (e.g. a foldable cover screen),
which were left ~40% empty at the cap. Fills the unfolded near-square
screen to ~100% and lets the cover screen fill further (and the rest fills
as columns deepen during play). Normal phones are unaffected — their fill
fraction is already below the cap. apply_dynamic_tableau_fan still floors
at TABLEAU_FAN_FRAC and deeper columns drive the fraction down, so nothing
overflows and hit-testing stays in sync.
Vertical centring of the residual was investigated but dropped: a 21:9
phone is aspect-identical to the cover screen, so centring can't be
targeted to foldables without also disconnecting the board from the HUD on
tall phones.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On a near-square viewport (e.g. an unfolded Galaxy Fold) a fresh deal left
the bottom ~40% of the screen empty: the dynamic fan (update_tableau_fan_frac)
measured only face-up column depth and returned early at a fresh deal (face-up
depth 1), so it never spread the tableau, and the deep face-down stacks were
ignored. The cold-start deal also never fired StateChangedEvent, and on Android
the safe-area-inset resize (frames 1-3) reset the fan to compute_layout's
sparse worst-case value, so even the post-move fill was wiped.
Move the fill into layout::apply_dynamic_tableau_fan, driven by each column's
TOTAL weighted depth (face-down cards count, scaled by the face-down/face-up
step ratio) so the deepest column fills the available height. Run it in three
places so every path stays filled: PostStartup (cold-start deal), on
StateChangedEvent (moves), and inside on_window_resized after compute_layout
(safe-area resize + fold/unfold). MAX_DYNAMIC_FAN_FRAC caps the spread so a
near-empty column keeps readable overlap; TABLEAU_FAN_FRAC floors it. Deeper
columns drive the fraction down so everything still fits — no overflow.
card_position/card_positions read the same fractions, so hit-testing stays
in sync.
Adds regression tests: cold-start deal fills the fan, and a resize re-fills it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Every move fired StateChangedEvent -> sync_cards, which rebuilt the full
visual for all 52 cards: despawning and respawning every child entity
(drop-shadow, border frame, and on Android a Text2d corner label needing
a glyph re-layout) even for the ~50 cards that did not move. That ~250
entity despawn/spawns plus 52 text re-layouts in a single frame spiked
the StateChangedEvent frame and stuttered the slide animation on
high-resolution devices (reported on a Galaxy Fold 7).
Add a CardChildrenKey component capturing the only inputs the child
entities depend on (face_up, card_size, color_blind, high_contrast).
update_card_entity now rebuilds children only when that key changes (a
flip, resize/fold, or accessibility toggle); a position-only move just
updates the Transform. The Sprite is still refreshed every sync (a cheap
handle swap), so theme/card-back image changes need no child rebuild.
Adds a regression test asserting an appearance-neutral StateChangedEvent
no longer despawns/respawns card label children.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The apksigner step relied on auto scheme selection, which produced an APK
carrying invalid v1 (JAR) signature files: META-INF/*.SF and *.RSA were
present but failed v1 verification (apksigner reports `v1 scheme: false`
while v2/v3 verify). Android installs such an APK fine via v2/v3, but
Obtainium parses the legacy v1 certificate at install time, gets an empty
cert list, and crashes with:
RangeError (length): Invalid value: valid value range is empty: 0
This is why the app adds fine in Obtainium (Gitea API only) but fails on
install (APK parse). minSdk is 26, so v1/JAR signing is unnecessary —
sign explicit v2+v3 only (matching modern Android tooling for minSdk >= 24)
and pass --min-sdk-version 26. Adds a post-sign guard that fails the build
if any META-INF v1 signature files remain.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Elevates the physical-device smoke test as the single remaining task for the
v0.40.0 release and clarifies the Matomo validation is an independent task,
not a release blocker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Updates SESSION_HANDOFF.md with the v0.40.0 Android release (PRs #105/#106/#108),
the pre-release validation performed, and the still-open physical-device smoke test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The setup doc pinned NDK 26.3.11579264, but newer NDKs build fine
(verified locally on 30.0.14904198 / build-tools 37.0.0: cross-compile,
android-target clippy, and a full signed arm64-v8a APK). Note that the
exact versions are not load-bearing and build_android_apk.sh
auto-discovers the newest installed NDK/build-tools.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The waste fan x-offset was computed two ways: the renderer used
tableau_col_step * 0.224 while the hit-test hard-coded card_size.x * 0.28.
These coincide on desktop (col_step = 1.25*cw) but drift on Android, where
tighter column spacing (H_GAP_DIVISOR=32, col_step ~= 1.03*cw) makes the
renderer fan at ~0.231*cw. The top fanned waste card's sprite then sits
~14px left of its click target, so dragging the visible top card grabs
the card beneath it.
Extract waste_fan_step() and tableau_col_step() as the single source for
both the renderer (card_plugin::card_positions) and the hit-test
(input_plugin::card_position) so they can no longer diverge. Add a
regression test that simulates Android-tight spacing and asserts the hit
target tracks the renderer.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds two find_draggable_at tests covering the reported stock/waste
drag bug: clicking the visible top of a multi-card waste must pick the
top index (not the buffer card beneath), and a lone waste card must
still be draggable. Both pass against current logic, pinning the
correct behaviour.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
handle_stock_click (and handle_touch_stock_tap) hit-tested both the face-down
deck AND the waste slot, so a click/tap on the drawn waste card fired
DrawRequestEvent — drawing the next card instead of playing the waste card, and
swallowing the first click of a double-click so auto-move never triggered.
Only the deck draws now. The waste card is left free to play: double-click /
double-tap to auto-move, or drag it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The cycle regression gate did a fresh page.goto() for each of 240 games in one
browser context. Around game ~100 the accumulated resources made
page.waitForFunction time out (30s), failing the gate on ~88% of runs — a
long-standing flaky-CI issue, not a product regression (the 18 e2e tests always
pass).
Load the page once and reset each game via a new __FERROUS_DEBUG__.newGame(seed,
drawThree) bridge method (added to game.js — it was already in play.html).
cycle_metrics.js now navigates once, then loops newGame() + runAutoplay with no
per-game reload, so the run stays fast and stable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The blanket `no-cache` from the earlier fix (#99) regressed the web-e2e cycle
regression gate: it reloads /play-classic 240 times, and with no-cache the
browser re-validated and recompiled the wasm on every load, blowing past the
30s bridge-ready timeout (green at #98, red from #99 onward).
Scope no-cache to just the `include_str!` HTML routes (which change on every
deploy and have no validators — the actual staleness source). The `/web` +
`/assets` ServeDir keep their default Last-Modified caching, so repeated page
loads reuse the downloaded/compiled wasm and the cycle gate is fast again. HTML
freshness — the fix Rhys needed — is unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 2048 surface limit was never wgpu's or the GPU's — it's
downlevel_webgl2_defaults().max_texture_dimension_2d (2048), which
WgpuSettingsPriority::WebGL2 forces. Switch to Functionality: on the WebGL2
(Gl) backend Bevy then adopts the adapter's real limits, which are still
WebGL2-constrained for features/buffers (shaders stay GLES-compatible) but
report the GPU's true max texture dimension (e.g. 16384). The device is
requested with exactly what the adapter offers, so creation can't fail, the
surface is no longer capped, and large viewports (4K) render with no letterbox
and no hardcoded cap.
Removes the resize_constraints cap and the play.html max-width/height caps.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The previous attempts (#97/#98) capped a wrapper element's max-width and
relied on the canvas's width:100% resolving against it — but winit observes
and sizes the *canvas element itself* (via ResizeObserver on its content box),
so the wrapper cap never reached the surface and /play still panicked at
2560x1440 on a 4K@150% viewport.
Use the canonical mechanism instead: set the primary Window's
`resize_constraints { max_width: 2048, max_height: 2048 }`. On web, Bevy maps
this to winit `set_max_inner_size` → the canvas's own `max-width`/`max-height`
style, so the wgpu surface can never exceed wgpu's downlevel_webgl2
max_texture_dimension_2d (2048). play.html mirrors the same `max-*` directly on
#bevy-canvas (belt-and-suspenders) and centres the letterbox with margin:auto;
the obsolete wrapper + clamp script are removed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Returning players kept getting stale builds: after the /play canvas fix
deployed, the origin served the new play.html (verified — 8/8 cache-busted
requests) but browsers still rendered the old one even after a hard reload.
Cause: the server sets no Cache-Control on the web router. The HTML pages are
include_str!'d into the binary and the wasm-bindgen output (canvas.js,
canvas_bg.wasm, solitaire_wasm.*) uses fixed filenames that change in place on
every deploy, so browsers heuristically cache them indefinitely.
Add `Cache-Control: no-cache` in the security_headers middleware (which wraps
the web router). Browsers now revalidate before using a cached copy; ServeDir
supplies Last-Modified/ETag so unchanged assets still return a cheap 304, while
changed ones (a new deploy) are re-fetched. Stops the stale-build problem for
everyone going forward.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Correction to the previous canvas clamp (#97), which would NOT have fixed the
crash. It capped the wrapper to the device's gl.MAX_TEXTURE_SIZE, but that's
the hardware limit — on a 4K/integrated GPU it reports 8192+, so the wrapper
was never actually capped and the 2560-wide surface still exceeded the limit.
The real ceiling is wgpu's, not the hardware's: on wasm Bevy creates the device
with Limits::downlevel_webgl2_defaults() (forced by WgpuSettingsPriority::WebGL2
in solitaire_web/src/lib.rs; see bevy_render-0.18.1 settings.rs), whose
max_texture_dimension_2d is a fixed 2048 regardless of GPU. So the cap must be
the constant 2048.
(For the record: the reporter's display is 3840x2160 at 150% scale → a 2560x1440
logical viewport, which is the 2560 in the panic — nothing hardcodes 1440p.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
funman300
funman300