Merge pull request 'fix(engine): raise dynamic tableau fan cap to fill tall viewports' (#115) from fix/cover-screen-fan-cap into master

MAX_DYNAMIC_FAN_FRAC 0.6 -> 0.9 so the dynamic tableau fill spreads
further on very tall / narrow viewports (e.g. a foldable cover screen),
which were left ~40% empty at the cap. Fills the unfolded near-square
screen to ~100% and lets the cover screen fill further (and the rest fills
as columns deepen during play). Normal phones are unaffected — their fill
fraction is already below the cap. apply_dynamic_tableau_fan still floors
at TABLEAU_FAN_FRAC and deeper columns drive the fraction down, so nothing
overflows and hit-testing stays in sync.

Vertical centring of the residual was investigated but dropped: a 21:9
phone is aspect-identical to the cover screen, so centring can't be
targeted to foldables without also disconnecting the board from the HUD on
tall phones.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

CHANGELOG.md

@@ -37,6 +37,18 @@ project follows [Semantic Versioning](https://semver.org/).
 
 ### Fixed
 
+- **Tableau fill on foldables / tall screens.** The tableau fan now spreads from
+  each column's total depth (face-down cards included) and refills on the
+  cold-start deal, every move, and on resize (incl. the Android safe-area-inset
+  resize and fold/unfold), so a near-square viewport such as an unfolded Galaxy
+  Fold no longer leaves the bottom of the screen empty. The fan spread cap was
+  raised so very tall / narrow viewports (e.g. a foldable cover screen) fill
+  further.
+- **Card-move animation jank.** A move now rebuilds a card's child visuals only
+  when its appearance changes (flip / resize / accessibility) instead of
+  despawning and respawning every card's children each `StateChangedEvent`,
+  removing the per-move spike that stuttered the slide animation on
+  high-resolution devices.
 - **Android and modal safe-area layout.** Modal cards now center within the
   usable area between status and gesture bars, additional modal-spawn guards were
   added, and Android build scripts now auto-discover SDK/NDK paths and strip
@@ -47,6 +59,11 @@ project follows [Semantic Versioning](https://semver.org/).
 - **Input and rendering issues.** Fixed stock/waste hit testing, accepted waste
   clicks, delayed first-run onboarding until splash teardown, and kept dragged
   stacks above all piles.
+- **Draw-Three waste fan hit testing on Android.** The renderer and the click
+  hit-test now share a single `waste_fan_step` / `tableau_col_step` source. They
+  previously diverged under Android's tighter column spacing, shifting the top
+  fanned waste card's hit target onto the card beneath it, so dragging the visible
+  card played the wrong one.
 - **Web runtime stability.** Fixed wasm32 runtime panics, HiDPI canvas surface
   sizing, WebGL2 shader compatibility, and Firefox boot/render behavior.
 - **Server and data hardening.** Moved bcrypt work to `spawn_blocking`, switched

SESSION_HANDOFF.md

@@ -1,16 +1,40 @@
 # Ferrous Solitaire — Session Handoff
 
-**Last updated:** 2026-06-09 — AVD Android launch smoke passed; physical-device gate remains.
+**Last updated:** 2026-06-25 — v0.40.0 released (Android APK published); physical-device gate remains.
 
 ---
 
 ## Current state
 
-- **Branch state:** `master` pushed to origin; latest commits are validation runbooks, card-label test coverage, and Android AVD smoke notes.
-- **Latest tag:** `v0.39.0`
-- **Working tree:** clean. Local `scripts/` helpers are excluded through `.git/info/exclude` and intentionally not committed.
-- **Latest verification in this follow-up:** `cargo test -p solitaire_core`; `cargo test -p solitaire_data matomo_client`; `cargo test -p solitaire_engine analytics_plugin`; `cargo test -p solitaire_engine settings_plugin`; `cargo test -p solitaire_engine card_plugin`; `cargo apk build -p solitaire_app --target x86_64-linux-android --lib`; AVD `Pixel_7` install/launch/input smoke.
-- **Full previous gate:** Claude reported recent card_game work pushed to origin and `cargo test` / `clippy` gates passing before the changelog follow-up.
+- **Branch state:** `master` pushed to origin; latest commits are the Draw-Three waste fan fix, its regression tests, and the NDK doc update (PRs #105–#108).
+- **Latest tag:** `v0.40.0` (released — signed arm64-v8a APK published to the Gitea release for Obtainium/sideload). `v0.39.1` was the prior published release.
+- **Working tree:** clean. Local `scripts/` helpers (incl. `scripts/watch_deploy.sh`) are intentionally not committed.
+- **Latest verification this session:** `cargo clippy --workspace --all-targets -- -D warnings`; `cargo test --workspace`; `cargo build -p solitaire_app`; Android cross-compile + clippy for `aarch64-linux-android` (clean); full local signed arm64-v8a APK via `scripts/build_android_apk.sh`; CI `android-release` for `v0.40.0` completed/success with APK download HTTP 200.
+- **Full previous gate:** card_game work pushed to origin with `cargo test` / `clippy` gates passing.
+
+---
+
+## v0.40.0 release (2026-06-25)
+
+Released via tag push → `.gitea/workflows/android-release.yml` built and signed the
+arm64-v8a release APK (release keystore, `versionCode 4000` / `versionName 0.40.0`,
+29.2 MB) and published it to the Gitea release. Obtainium clients tracking the repo
+pick it up automatically.
+
+- Release: https://git.aleshym.co/funman300/Ferrous-Solitaire/releases/tag/v0.40.0
+
+| PR | Summary |
+|----|---------|
+| #106 | **fix(engine):** Draw-Three waste fan hit-test now shares the renderer's fan step (`card_plugin::waste_fan_step` / `tableau_col_step`). The two had diverged under Android's tighter column spacing (`H_GAP_DIVISOR=32`), shifting the top fanned waste card's click target onto the card beneath it — so dragging the visible top card played the wrong one. Desktop/web were unaffected (the formulas already coincided there). |
+| #105 | **test(engine):** waste-card draggability regression tests (`find_draggable_at` picks the waste top with multiple cards and as a lone card). |
+| #108 | **docs(android):** NDK reference updated `26.3.11579264` → `30.0.14904198`; noted versions are not load-bearing and `build_android_apk.sh` auto-discovers the newest NDK/build-tools. |
+
+Pre-release validation performed locally this session: workspace clippy/test/build
+gates; `aarch64-linux-android` cross-compile + clippy clean (covers the
+`#[cfg(target_os = "android")]` paths that host CI never lints); release manifest
+sanity (`solitaire_app/android/AndroidManifest.xml` has no version fields so CI
+injection works; `lib_name` matches `[lib].name`); and a full signed local APK
+proving the `build_android_apk.sh` packaging pipeline end-to-end.
 
 ---
 
@@ -103,12 +127,23 @@ Three bugs fixed:
 
 ## Open punch list
 
-### 1. Android APK launch verification (Option A)
+### 1. Physical-device smoke test — THE ONLY REMAINING v0.40.0 ITEM
 
-Physical device test: install the latest APK on a real Android device (not AVD),
-and run the checklist in `docs/ANDROID.md`. This has never been gated in CI.
-AVD `adb shell input tap` doesn't deliver real touch events, so physical-device
-smoke testing is the only gate.
+This is the **single outstanding task** for the v0.40.0 Android release. Everything
+else is done and verified: workspace gates, `aarch64-linux-android` cross-compile +
+clippy, release manifest sanity, a full local signed APK, the published release, and
+Obtainium-facing delivery (public releases API, latest non-draft release, APK
+downloadable anonymously). The only thing that cannot be done without hardware is
+running the app on a real phone.
+
+Install the published APK on a real Android device (not AVD) and run the checklist
+in `docs/ANDROID.md §4`. This has never been gated in CI — AVD `adb shell input tap`
+doesn't deliver real touch events, so physical-device smoke testing is the only gate.
+
+The signed release APK is published (grab it from the release page, or use the local
+`target/debug/apk/ferrous-solitaire.apk`). When testing, specifically exercise the
+Draw-Three waste fan fixed in #106: switch to Draw-Three, draw several cards, and
+confirm dragging the visible top waste card plays *that* card, not the one beneath it.
 
 Latest AVD smoke (2026-06-08 local / 2026-06-09 UTC): built
 `target/debug/apk/ferrous-solitaire.apk` for `x86_64-linux-android`, installed
@@ -117,13 +152,13 @@ rendered the board, safe-area insets resolved as `top=136 bottom=63 left=0
 right=0` after 2 frames, onboarding could be dismissed via AVD input, and
 filtered logcat showed no Ferrous panic/fatal/ANR.
 
-### 2. Matomo analytics live validation
+### 2. Matomo analytics live validation (independent — NOT a v0.40.0 release blocker)
 
-`Settings` has `analytics_enabled`, `matomo_url`, and `matomo_site_id`; the engine
-consumes them via `AnalyticsPlugin` on non-wasm targets. Remaining work is live
-validation against the deployed Matomo instance. Use
-`docs/analytics-validation.md` for the native validation checklist and the
-current web/WASM decision notes.
+Separate, ongoing task unrelated to the Android release. `Settings` has
+`analytics_enabled`, `matomo_url`, and `matomo_site_id`; the engine consumes them via
+`AnalyticsPlugin` on non-wasm targets. Remaining work is live validation against the
+deployed Matomo instance. Use `docs/analytics-validation.md` for the native
+validation checklist and the current web/WASM decision notes.
 
 ---
 

docs/ANDROID.md

@@ -35,7 +35,7 @@ rm /tmp/cmdline-tools.zip
   echo ''
   echo '# Android dev'
   echo 'export ANDROID_HOME="$HOME/Android/Sdk"'
-  echo 'export ANDROID_NDK_HOME="$ANDROID_HOME/ndk/26.3.11579264"'
+  echo 'export ANDROID_NDK_HOME="$ANDROID_HOME/ndk/30.0.14904198"'
   echo 'export JAVA_HOME="$(dirname $(dirname $(readlink -f $(which java))))"'
   echo 'export PATH="$PATH:$ANDROID_HOME/cmdline-tools/latest/bin:$ANDROID_HOME/platform-tools:$ANDROID_HOME/emulator"'
 } >> ~/.bashrc
@@ -49,10 +49,15 @@ sdkmanager \
   "platform-tools" \
   "platforms;android-34" \
   "build-tools;34.0.0" \
-  "ndk;26.3.11579264" \
+  "ndk;30.0.14904198" \
   "emulator" \
   "system-images;android-34;google_apis;x86_64"
 
+# The exact NDK/build-tools versions above are not load-bearing — newer ones
+# work (verified on NDK 30.0.14904198 / build-tools 37.0.0). `scripts/build_android_apk.sh`
+# auto-discovers the newest installed NDK and build-tools, so set ANDROID_NDK_HOME
+# (step 3) to whatever version you actually install here.
+
 # 6. AVD for testing (one-time).
 echo no | avdmanager create avd \
   -n bevy_test \

scripts/build_android_apk.sh

@@ -213,15 +213,35 @@ KEY_PASS="${KEY_PASS:-$KEYSTORE_PASS}"
 
 mkdir -p "$(dirname "$APK_OUT")"
 echo ">>> apksigner sign -> $APK_OUT"
+# Sign the schemes explicitly instead of relying on apksigner's auto behaviour.
+# Left to "auto", this pipeline produced an APK carrying invalid v1 (JAR)
+# signature files (META-INF/*.SF/.RSA present but failing v1 verification).
+# Android installs it fine via v2/v3, but Obtainium parses the APK's legacy v1
+# certificate at install time, gets an empty cert list, and crashes with
+# "RangeError (length): Invalid value: valid value range is empty: 0".
+# minSdk is 26 (solitaire_app/android/AndroidManifest.xml), so v1/JAR signing is
+# not needed at all — disable it and ship a clean v2+v3 signature, matching what
+# modern Android tooling produces for minSdk >= 24.
 "$BT/apksigner" sign \
   --ks "$KEYSTORE" \
   --ks-pass "pass:$KEYSTORE_PASS" \
   --ks-key-alias "$KEY_ALIAS" \
   --key-pass "pass:$KEY_PASS" \
+  --min-sdk-version 26 \
+  --v1-signing-enabled false \
+  --v2-signing-enabled true \
+  --v3-signing-enabled true \
   --out "$APK_OUT" \
   "$STAGING/app-aligned.apk"
 
 echo ">>> verify"
-"$BT/apksigner" verify --verbose "$APK_OUT"
+"$BT/apksigner" verify --min-sdk-version 26 --verbose "$APK_OUT"
+
+# Guard: no leftover v1/JAR signature files may remain — their presence (valid or
+# not) is what tripped Obtainium. Fail the build if any slipped through.
+if unzip -l "$APK_OUT" 2>/dev/null | grep -qiE 'META-INF/.*\.(SF|RSA|DSA|EC)$'; then
+  echo "ERROR: APK still contains v1/JAR signature files; expected v2+v3 only" >&2
+  exit 1
+fi
 
 echo ">>> done: $APK_OUT"

solitaire_engine/src/card_plugin.rs

@@ -25,7 +25,7 @@ use crate::card_animation::CardAnimation;
 use crate::events::{CardFaceRevealedEvent, CardFlippedEvent, StateChangedEvent};
 use crate::font_plugin::FontResource;
 use crate::game_plugin::GameMutation;
-use crate::layout::{Layout, LayoutResource, LayoutSystem, TABLEAU_FAN_FRAC};
+use crate::layout::{Layout, LayoutResource, LayoutSystem};
 use crate::pause_plugin::PausedResource;
 use crate::platform::USE_TOUCH_UI_LAYOUT;
 use crate::resources::{DragState, GameStateResource};
@@ -39,7 +39,7 @@ use crate::ui_theme::{
 };
 
 /// Per-card vertical step for face-down tableau cards, as a fraction of
-/// card height. Smaller than [`TABLEAU_FAN_FRAC`] because face-down cards
+/// card height. Smaller than [`crate::layout::TABLEAU_FAN_FRAC`] because face-down cards
 /// don't need their full body shown — only the back-pattern strip is
 /// visible. Public so `input_plugin` can mirror the exact sprite layout
 /// when hit-testing tableau columns; any drift between this and the
@@ -63,6 +63,36 @@ pub const TABLEAU_FACEDOWN_FAN_FRAC: f32 = 0.14;
 // foundation piles bleeding through when a 2 sits on an Ace.
 pub const STACK_FAN_FRAC: f32 = 0.025;
 
+/// Per-card horizontal fan step for the Draw-Three waste, in logical pixels.
+///
+/// Derived from the actual tableau column spacing (`Tableau2.x − Tableau1.x`)
+/// rather than a fixed fraction of card width, so the fan scales with the
+/// platform's `H_GAP_DIVISOR` (desktop ≈ 1.25×cw spacing, Android ≈ 1.03×cw).
+/// Public so `input_plugin` can hit-test the fanned waste cards at the exact
+/// x-offsets the renderer uses; any drift makes a click on the top fanned card
+/// land on the card beneath it.
+pub fn waste_fan_step(layout: &Layout) -> f32 {
+    tableau_col_step(layout) * 0.224
+}
+
+/// Horizontal distance between adjacent tableau columns (`Tableau2.x −
+/// Tableau1.x`), in logical pixels. The face-down stock is rendered one column
+/// step left of the waste, and the Draw-Three waste fan ([`waste_fan_step`]) is
+/// a fraction of it. Public so hit-testing mirrors the renderer exactly.
+pub fn tableau_col_step(layout: &Layout) -> f32 {
+    let t1 = layout
+        .pile_positions
+        .get(&KlondikePile::Tableau(Tableau::Tableau1))
+        .copied()
+        .unwrap_or_default();
+    let t2 = layout
+        .pile_positions
+        .get(&KlondikePile::Tableau(Tableau::Tableau2))
+        .copied()
+        .unwrap_or_default();
+    (t2.x - t1.x).abs()
+}
+
 /// Font size as a fraction of card width.
 const FONT_SIZE_FRAC: f32 = 0.28;
 
@@ -165,6 +195,40 @@ pub struct CardEntity {
     pub card: Card,
 }
 
+/// Cached signature of the inputs that determine a card entity's *child*
+/// visuals (drop-shadow, border frame, and the rank/suit label / large-print
+/// corner overlay). Stored on each card so [`update_card_entity`] can skip the
+/// expensive `despawn_related::<Children>()` + child respawn when nothing about
+/// the appearance changed — the common case during a move, where only the
+/// card's position changes. Without this guard every `StateChangedEvent`
+/// rebuilds all 52 cards' children (≈250 entity spawn/despawns plus 52 `Text2d`
+/// glyph re-layouts) in a single frame, which stutters the slide animation on
+/// high-resolution devices.
+///
+/// The children depend only on these four inputs; the card identity is fixed
+/// per entity, and the face/back *image* is handled by the always-refreshed
+/// `Sprite` (a cheap handle swap), so theme/card-back changes need no child
+/// rebuild.
+#[derive(Component, Clone, Copy, PartialEq)]
+struct CardChildrenKey {
+    face_up: bool,
+    card_size: Vec2,
+    color_blind: bool,
+    high_contrast: bool,
+}
+
+/// Query data read by the card-sync systems for each live card entity:
+/// its id, card identity, current transform, any in-flight curve animation,
+/// and its cached child-appearance key. Factored into an alias to keep the
+/// system signatures readable (and satisfy clippy's `type_complexity`).
+type CardSyncData = (
+    Entity,
+    &'static CardEntity,
+    &'static Transform,
+    Option<&'static CardAnimation>,
+    Option<&'static CardChildrenKey>,
+);
+
 /// Render-side index mapping each live board card to its [`CardEntity`].
 ///
 /// Maintained exclusively by [`rebuild_card_entity_index`] in `PostUpdate`,
@@ -461,7 +525,13 @@ impl Plugin for CardPlugin {
             .add_systems(Startup, load_card_images)
             .add_systems(
                 PostStartup,
-                (sync_cards_startup, update_stock_empty_indicator_startup),
+                (
+                    // Fill the tableau fan before the first render so the
+                    // cold-start deal already uses the full viewport height.
+                    fill_tableau_fan_on_startup.before(sync_cards_startup),
+                    sync_cards_startup,
+                    update_stock_empty_indicator_startup,
+                ),
             )
             .add_systems(
                 Update,
@@ -702,7 +772,7 @@ fn sync_cards_startup(
     layout: Option<Res<LayoutResource>>,
     slide_dur: Option<Res<EffectiveSlideDuration>>,
     settings: Option<Res<SettingsResource>>,
-    entities: Query<(Entity, &CardEntity, &Transform, Option<&CardAnimation>)>,
+    entities: Query<CardSyncData>,
     card_images: Option<Res<CardImageSet>>,
     font_res: Option<Res<FontResource>>,
 ) {
@@ -737,7 +807,7 @@ fn sync_cards_on_change(
     layout: Option<Res<LayoutResource>>,
     slide_dur: Option<Res<EffectiveSlideDuration>>,
     settings: Option<Res<SettingsResource>>,
-    entities: Query<(Entity, &CardEntity, &Transform, Option<&CardAnimation>)>,
+    entities: Query<CardSyncData>,
     card_images: Option<Res<CardImageSet>>,
     font_res: Option<Res<FontResource>>,
 ) {
@@ -776,7 +846,7 @@ fn sync_cards(
     back_colour: Color,
     color_blind: bool,
     high_contrast: bool,
-    entities: &Query<(Entity, &CardEntity, &Transform, Option<&CardAnimation>)>,
+    entities: &Query<CardSyncData>,
     card_images: Option<&CardImageSet>,
     selected_back: usize,
     font_handle: Option<&Handle<Font>>,
@@ -810,18 +880,24 @@ fn sync_cards(
     //   • end ≠ target  → the game state has changed (e.g. a new game started
     //                      while the win-cascade was mid-flight); cancel the
     //                      stale `CardAnimation` and apply the new position.
-    let mut existing: HashMap<Card, (Entity, Vec3, Option<Vec2>)> = HashMap::new();
-    for (entity, marker, transform, anim) in entities.iter() {
+    let mut existing: HashMap<Card, (Entity, Vec3, Option<Vec2>, Option<CardChildrenKey>)> =
+        HashMap::new();
+    for (entity, marker, transform, anim, children_key) in entities.iter() {
         existing.insert(
             marker.card.clone(),
-            (entity, transform.translation, anim.map(|a| a.end)),
+            (
+                entity,
+                transform.translation,
+                anim.map(|a| a.end),
+                children_key.copied(),
+            ),
         );
     }
 
     let live_ids: HashSet<Card> = positions.iter().map(|(c, _, _)| c.0.clone()).collect();
 
     // Despawn any entity whose card is no longer tracked.
-    for (card, (entity, _, _)) in &existing {
+    for (card, (entity, _, _, _)) in &existing {
         if !live_ids.contains(card) {
             commands.entity(*entity).despawn();
         }
@@ -832,7 +908,7 @@ fn sync_cards(
     // behind the incoming top card during the draw slide animation.
     for ((card, face_up), position, z) in positions {
         let entity = match existing.get(&card) {
-            Some(&(entity, cur, anim_end)) => {
+            Some(&(entity, cur, anim_end, children_key)) => {
                 // If a CardAnimation is in flight, check whether its destination
                 // still matches the game-state target.  If the game moved the card
                 // elsewhere (e.g. new game started during a win-cascade scatter),
@@ -859,6 +935,7 @@ fn sync_cards(
                     high_contrast,
                     cur,
                     has_anim,
+                    children_key,
                     card_images,
                     selected_back,
                     font_handle,
@@ -908,34 +985,18 @@ fn card_positions(game: &GameState, layout: &Layout) -> Vec<((Card, bool), Vec2,
         (KlondikePile::Tableau(Tableau::Tableau7), false),
     ];
 
-    // Compute the Draw-Three waste fan step proportional to the column spacing
-    // (waste_x − stock_x = card_width + h_gap) rather than a fixed fraction of
-    // card_width.  On desktop (H_GAP_DIVISOR=4) col_step = 1.25×cw and
-    // 0.224 × 1.25 = 0.28 — identical to the previous constant.  On Android
-    // (H_GAP_DIVISOR=32) col_step ≈ 1.031×cw so fan_step ≈ 0.231×cw, keeping
-    // the top fanned card's centre within the waste column's own horizontal
-    // footprint instead of spilling into the adjacent gap.
-    let tableau_col_step = {
-        let t1 = layout
-            .pile_positions
-            .get(&KlondikePile::Tableau(Tableau::Tableau1))
-            .copied()
-            .unwrap_or_default();
-        let t2 = layout
-            .pile_positions
-            .get(&KlondikePile::Tableau(Tableau::Tableau2))
-            .copied()
-            .unwrap_or_default();
-        (t2.x - t1.x).abs()
-    };
-    let waste_fan_step = tableau_col_step * 0.224;
+    // Draw-Three waste fan step, proportional to the column spacing so it scales
+    // with the platform's H_GAP_DIVISOR. Shared with input_plugin's hit-test via
+    // `waste_fan_step` so the two never drift (a drift puts the top fanned card's
+    // click target on the card beneath it).
+    let waste_fan_step = waste_fan_step(layout);
 
     for (pile_type, is_stock_area) in piles {
         let Some(mut base) = layout.pile_positions.get(&pile_type).copied() else {
             continue;
         };
         if matches!(pile_type, KlondikePile::Stock) && is_stock_area {
-            base.x -= tableau_col_step;
+            base.x -= tableau_col_step(layout);
         }
         let is_tableau = matches!(pile_type, KlondikePile::Tableau(_));
         let is_waste = matches!(pile_type, KlondikePile::Stock) && !is_stock_area;
@@ -1100,6 +1161,14 @@ fn spawn_card_entity(
             );
         });
     }
+    // Record the appearance signature so subsequent `update_card_entity` calls
+    // can skip rebuilding these children until one of the inputs changes.
+    entity.insert(CardChildrenKey {
+        face_up,
+        card_size: layout.card_size,
+        color_blind,
+        high_contrast,
+    });
     entity_id
 }
 
@@ -1118,6 +1187,7 @@ fn update_card_entity(
     high_contrast: bool,
     cur: Vec3,
     has_card_animation: bool,
+    existing_children_key: Option<CardChildrenKey>,
     card_images: Option<&CardImageSet>,
     selected_back: usize,
     font_handle: Option<&Handle<Font>>,
@@ -1166,44 +1236,58 @@ fn update_card_entity(
         }
     }
 
-    // Despawn any stale children and re-add the per-card drop shadow plus,
-    // in solid-colour fallback mode, the label overlay. In image mode the
-    // rank/suit are baked into the PNG; on Android we also add a large-print
-    // corner overlay so they are legible at phone scale.
-    commands.entity(entity).despawn_related::<Children>();
-    commands.entity(entity).with_children(|b| {
-        add_card_shadow_child(b, layout.card_size);
-    });
-    commands.entity(entity).with_children(|b| {
-        add_card_back_frame_child(b, layout.card_size);
-    });
-    if card_images.is_none() {
+    // Rebuild the card's child visuals (drop-shadow, border frame, and the
+    // rank/suit label / large-print corner overlay) only when an input that
+    // affects them actually changed. The child set depends solely on
+    // `CardChildrenKey`; the face/back image is carried by the always-refreshed
+    // `Sprite` above, so theme/card-back swaps need no child rebuild. Skipping
+    // this on a position-only move avoids despawning and respawning the child
+    // entities (incl. a `Text2d` glyph re-layout) for all 52 cards on every
+    // `StateChangedEvent` — the spike that stuttered the slide animation on
+    // high-resolution devices.
+    let new_children_key = CardChildrenKey {
+        face_up,
+        card_size: layout.card_size,
+        color_blind,
+        high_contrast,
+    };
+    if existing_children_key != Some(new_children_key) {
+        commands.entity(entity).despawn_related::<Children>();
         commands.entity(entity).with_children(|b| {
-            b.spawn((
-                CardLabel,
-                Text2d::new(label_for(card)),
-                TextFont {
-                    font_size: layout.card_size.x * FONT_SIZE_FRAC,
-                    ..default()
-                },
-                TextColor(text_colour(card, color_blind, high_contrast)),
-                Transform::from_xyz(0.0, 0.0, 0.01),
-                label_visibility(face_up),
-            ));
+            add_card_shadow_child(b, layout.card_size);
         });
-    }
-    if USE_TOUCH_UI_LAYOUT && card_images.is_some() {
         commands.entity(entity).with_children(|b| {
-            add_android_corner_label(
-                b,
-                card,
-                face_up,
-                layout.card_size,
-                color_blind,
-                high_contrast,
-                font_handle,
-            );
+            add_card_back_frame_child(b, layout.card_size);
         });
+        if card_images.is_none() {
+            commands.entity(entity).with_children(|b| {
+                b.spawn((
+                    CardLabel,
+                    Text2d::new(label_for(card)),
+                    TextFont {
+                        font_size: layout.card_size.x * FONT_SIZE_FRAC,
+                        ..default()
+                    },
+                    TextColor(text_colour(card, color_blind, high_contrast)),
+                    Transform::from_xyz(0.0, 0.0, 0.01),
+                    label_visibility(face_up),
+                ));
+            });
+        }
+        if USE_TOUCH_UI_LAYOUT && card_images.is_some() {
+            commands.entity(entity).with_children(|b| {
+                add_android_corner_label(
+                    b,
+                    card,
+                    face_up,
+                    layout.card_size,
+                    color_blind,
+                    high_contrast,
+                    font_handle,
+                );
+            });
+        }
+        commands.entity(entity).insert(new_children_key);
     }
 }
 
@@ -2395,15 +2479,21 @@ fn resize_android_corner_labels(
     }
 }
 
-/// Adjusts `LayoutResource.tableau_fan_frac` to match the current maximum
-/// face-up column depth. Runs after every `StateChangedEvent` so the fan
-/// expands as the player reveals cards while staying within the window.
+/// Adjusts `LayoutResource.tableau_fan_frac` (and the face-down companion) so
+/// the deepest tableau column fills the available vertical space at every stage
+/// of play. Runs after every `StateChangedEvent`.
 ///
-/// On fresh deal (max face-up depth = 1) the function returns early, leaving
-/// both fracs at the window-size-adaptive values that `compute_layout` already
-/// computed for the current viewport. Previously it overwrote the adaptive
-/// value with the desktop minimum (0.25) — the wrong behaviour on portrait
-/// phones where the adaptive value is much larger.
+/// Depth is measured across *all* cards in a column, weighting each face-down
+/// card by the fixed face-down/face-up step ratio. Counting the face-down
+/// portion — not just the face-up tail — is what fills the lower screen on a
+/// fresh deal (the deepest column is then six face-down cards under one face-up
+/// one): the earlier face-up-only depth was 1, so the fan never spread and the
+/// bottom half of a near-square viewport (e.g. an unfolded foldable) sat empty.
+///
+/// Deeper columns drive the fraction down so everything still fits the window;
+/// [`crate::layout::TABLEAU_FAN_FRAC`] floors it to the desktop feel and
+/// [`MAX_DYNAMIC_FAN_FRAC`] caps it so a near-empty column doesn't fling its few
+/// cards far apart.
 fn update_tableau_fan_frac(
     mut events: MessageReader<StateChangedEvent>,
     game: Option<Res<GameStateResource>>,
@@ -2418,59 +2508,35 @@ fn update_tableau_fan_frac(
     let Some(layout) = layout.as_mut() else {
         return;
     };
-
-    let max_depth = [
-        Tableau::Tableau1,
-        Tableau::Tableau2,
-        Tableau::Tableau3,
-        Tableau::Tableau4,
-        Tableau::Tableau5,
-        Tableau::Tableau6,
-        Tableau::Tableau7,
-    ]
-    .into_iter()
-    .map(|tableau| {
-        game.0
-            .pile(KlondikePile::Tableau(tableau))
-            .into_iter()
-            .filter(|(_, face_up)| *face_up)
-            .count()
-    })
-    .max()
-    .unwrap_or(0);
-
-    let card_h = layout.0.card_size.y;
-    let avail = layout.0.available_tableau_height;
-
-    // With ≤ 1 face-up card per column (fresh deal, or completely face-down
-    // piles) the face-up fan fraction has no visible effect. Leave both fracs
-    // at the adaptive values set by compute_layout rather than snapping them
-    // to the desktop minimum.
-    if max_depth <= 1 || card_h <= 0.0 {
-        return;
-    }
-
-    let ideal = avail / ((max_depth - 1) as f32 * card_h);
-    let max_frac = if card_h > 0.0 {
-        avail / (12.0 * card_h)
-    } else {
-        TABLEAU_FAN_FRAC
-    };
-    let new_frac = ideal.clamp(TABLEAU_FAN_FRAC, max_frac.max(TABLEAU_FAN_FRAC));
-    let new_facedown_frac = new_frac * (TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC);
-
-    if (layout.0.tableau_fan_frac - new_frac).abs() > 1e-4 {
-        layout.0.tableau_fan_frac = new_frac;
-    }
-    if (layout.0.tableau_facedown_fan_frac - new_facedown_frac).abs() > 1e-4 {
-        layout.0.tableau_facedown_fan_frac = new_facedown_frac;
-    }
+    crate::layout::apply_dynamic_tableau_fan(&game.0, &mut layout.0);
 }
 
+/// PostStartup sibling of [`update_tableau_fan_frac`]. The initial deal is
+/// inserted directly as `GameStateResource` at startup without a
+/// `StateChangedEvent`, so the event-driven system never fires for it. This
+/// runs once, before [`sync_cards_startup`] renders, so the very first board
+/// (cold start) already fills the viewport — otherwise a fresh deal on a tall /
+/// near-square screen (e.g. an unfolded foldable) renders with the unspread fan
+/// and a large empty band below the tableau until the first move.
+fn fill_tableau_fan_on_startup(
+    game: Option<Res<GameStateResource>>,
+    mut layout: Option<ResMut<LayoutResource>>,
+) {
+    let Some(game) = game else {
+        return;
+    };
+    let Some(layout) = layout.as_mut() else {
+        return;
+    };
+    crate::layout::apply_dynamic_tableau_fan(&game.0, &mut layout.0);
+}
+
+
 #[cfg(test)]
 mod tests {
     use super::*;
     use crate::game_plugin::GamePlugin;
+    use crate::layout::TABLEAU_FAN_FRAC;
     use crate::table_plugin::TablePlugin;
     use solitaire_core::Deck;
 
@@ -2897,6 +2963,59 @@ mod tests {
         }
     }
 
+    #[test]
+    fn cold_start_deal_fills_tableau_fan() {
+        // The initial deal is inserted at startup without a StateChangedEvent, so
+        // the event-driven fan update never fires for it. The PostStartup fill
+        // must spread the fan from the deepest column's *total* depth (face-down
+        // included) so a fresh deal already fills the viewport — otherwise a
+        // near-square / unfolded-foldable screen renders with a large empty band
+        // below the tableau. Mirrors apply_dynamic_tableau_fan's formula against
+        // the actual dealt state so it fails if the startup fill is dropped or
+        // reverts to face-up-only depth.
+        let app = app();
+
+        let game = app.world().resource::<GameStateResource>();
+        let facedown_ratio = TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC;
+        let max_demand = [
+            Tableau::Tableau1,
+            Tableau::Tableau2,
+            Tableau::Tableau3,
+            Tableau::Tableau4,
+            Tableau::Tableau5,
+            Tableau::Tableau6,
+            Tableau::Tableau7,
+        ]
+        .into_iter()
+        .map(|t| {
+            let pile = game.0.pile(KlondikePile::Tableau(t));
+            let steps = pile.len().saturating_sub(1);
+            pile.iter()
+                .take(steps)
+                .map(|(_, up)| if *up { 1.0 } else { facedown_ratio })
+                .sum::<f32>()
+        })
+        .fold(0.0_f32, f32::max);
+        assert!(
+            max_demand > 1.0,
+            "a fresh deal's deepest column should contribute several fan steps, got {max_demand}"
+        );
+
+        let layout = app.world().resource::<LayoutResource>();
+        let card_h = layout.0.card_size.y;
+        let avail = layout.0.available_tableau_height;
+        let expected = (avail / (max_demand * card_h))
+            .clamp(TABLEAU_FAN_FRAC, crate::layout::MAX_DYNAMIC_FAN_FRAC);
+
+        assert!(
+            (layout.0.tableau_fan_frac - expected).abs() < 1e-3,
+            "cold-start fan {} should equal the demand-filled value {} \
+             (card_h={card_h}, avail={avail}, demand={max_demand})",
+            layout.0.tableau_fan_frac,
+            expected,
+        );
+    }
+
     #[test]
     fn flip_half_secs_is_positive() {
         const {
@@ -3162,6 +3281,56 @@ mod tests {
         });
     }
 
+    #[test]
+    fn resize_keeps_tableau_fan_filled() {
+        // The Android safe-area-inset update (frames 1-3) and fold/unfold both
+        // fire a WindowResized that recomputes the layout, resetting the fan to
+        // compute_layout's sparse worst-case value. on_window_resized must
+        // re-apply the dynamic fill so the tableau keeps filling the viewport
+        // after a resize — not only at deal time. Without the fill in the resize
+        // path the fan would snap back to the worst-case value and the lower
+        // screen would empty out on the first resize.
+        let mut app = app();
+
+        // A tall near-square window (like an unfolded foldable) where the dynamic
+        // fill clearly exceeds the worst-case fan.
+        fire_window_resize(&mut app, 1400.0, 1500.0);
+        advance_past_resize_throttle(&mut app);
+
+        let game = app.world().resource::<GameStateResource>();
+        let facedown_ratio = TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC;
+        let max_demand = [
+            Tableau::Tableau1,
+            Tableau::Tableau2,
+            Tableau::Tableau3,
+            Tableau::Tableau4,
+            Tableau::Tableau5,
+            Tableau::Tableau6,
+            Tableau::Tableau7,
+        ]
+        .into_iter()
+        .map(|t| {
+            let pile = game.0.pile(KlondikePile::Tableau(t));
+            let steps = pile.len().saturating_sub(1);
+            pile.iter()
+                .take(steps)
+                .map(|(_, up)| if *up { 1.0 } else { facedown_ratio })
+                .sum::<f32>()
+        })
+        .fold(0.0_f32, f32::max);
+
+        let layout = app.world().resource::<LayoutResource>();
+        let expected = (layout.0.available_tableau_height / (max_demand * layout.0.card_size.y))
+            .clamp(TABLEAU_FAN_FRAC, crate::layout::MAX_DYNAMIC_FAN_FRAC);
+        assert!(
+            (layout.0.tableau_fan_frac - expected).abs() < 1e-3,
+            "after resize the fan {} should be re-filled to {} (the resize path must \
+             re-apply apply_dynamic_tableau_fan)",
+            layout.0.tableau_fan_frac,
+            expected,
+        );
+    }
+
     #[test]
     fn resize_does_not_despawn_card_labels() {
         // Spawn a fresh app, capture the current set of CardLabel entity IDs,
@@ -3202,6 +3371,44 @@ mod tests {
         }
     }
 
+    #[test]
+    fn appearance_neutral_state_change_does_not_rebuild_card_children() {
+        // A StateChangedEvent that doesn't alter any card's appearance — the
+        // common case during a move, for the ~50 cards that didn't move or flip
+        // — must NOT despawn and respawn child entities. Before the
+        // CardChildrenKey guard every StateChangedEvent rebuilt all 52 cards'
+        // children (incl. a Text2d glyph re-layout each), the per-move spike
+        // that stuttered the slide animation on high-resolution devices.
+        let mut app = app();
+
+        let labels_before: HashSet<Entity> = app
+            .world_mut()
+            .query_filtered::<Entity, With<CardLabel>>()
+            .iter(app.world())
+            .collect();
+        assert!(
+            !labels_before.is_empty(),
+            "fixture should have spawned CardLabel children in the fallback path"
+        );
+
+        // Fire a StateChangedEvent without mutating the game: no card moves or
+        // flips, so every card's CardChildrenKey is unchanged.
+        app.world_mut().write_message(StateChangedEvent);
+        app.update();
+
+        let labels_after: HashSet<Entity> = app
+            .world_mut()
+            .query_filtered::<Entity, With<CardLabel>>()
+            .iter(app.world())
+            .collect();
+
+        assert_eq!(
+            labels_before, labels_after,
+            "an appearance-neutral StateChangedEvent must not despawn/respawn card \
+             children — the CardChildrenKey guard should have skipped the rebuild"
+        );
+    }
+
     #[test]
     fn resize_in_place_updates_card_label_font_size() {
         // Capture an arbitrary CardLabel's TextFont.font_size before resize,

solitaire_engine/src/input_plugin.rs

@@ -35,7 +35,7 @@ use crate::auto_complete_plugin::AutoCompleteState;
 use crate::card_animation::tuning::AnimationTuning;
 use crate::card_animation::{CardAnimation, MotionCurve};
 use crate::card_plugin::{
-    CardEntity, CardEntityIndex, HintHighlight, HintHighlightTimer, STACK_FAN_FRAC,
+    CardEntity, CardEntityIndex, HintHighlight, HintHighlightTimer, STACK_FAN_FRAC, waste_fan_step,
 };
 use crate::challenge_plugin::CHALLENGE_UNLOCK_LEVEL;
 use crate::events::{
@@ -1175,12 +1175,15 @@ fn card_position(
         Vec2::new(base.x, base.y + y_offset)
     } else if matches!(pile, KlondikePile::Stock) && game.draw_mode() == DrawStockConfig::DrawThree {
         // In Draw-Three mode the top 3 waste cards are fanned in X to match
-        // card_plugin::card_positions(). Hit-testing must use the same offsets
-        // so clicking the visually rightmost (top) card actually registers.
+        // card_plugin::card_positions(). Hit-testing uses the same `waste_fan_step`
+        // so clicking the visually rightmost (top) card actually registers — a
+        // fixed `card_size.x * 0.28` matched the renderer on desktop but drifted
+        // on Android (tighter column spacing), shifting the top card's hit target
+        // onto the card beneath it.
         let pile_len = game.waste_cards().len();
         let visible_start = pile_len.saturating_sub(3);
         let slot = stack_index.saturating_sub(visible_start) as f32;
-        Vec2::new(base.x + slot * layout.card_size.x * 0.28, base.y)
+        Vec2::new(base.x + slot * waste_fan_step(layout), base.y)
     } else {
         base
     }
@@ -1829,7 +1832,7 @@ const _VEC3_REFERENCED: Option<Vec3> = None;
 mod tests {
     use super::*;
     use crate::layout::compute_layout;
-    use solitaire_core::{Foundation, Tableau};
+    use solitaire_core::{Deck, Foundation, Rank, Suit, Tableau};
     use solitaire_core::{DrawStockConfig, game_state::GameState};
 
     fn clear_test_piles(game: &mut GameState) {
@@ -1910,6 +1913,90 @@ mod tests {
         assert_eq!(result.2.len(), 1);
     }
 
+    #[test]
+    fn find_draggable_picks_waste_top_with_multiple_cards() {
+        // Reproduces the reported "drags the wrong waste card" bug: with several
+        // cards in the waste, clicking the visible top must pick the actual top
+        // (last index), not the buffer card underneath it.
+        let mut game = GameState::new(42, DrawStockConfig::DrawOne);
+        let layout = compute_layout(Vec2::new(1280.0, 800.0), 0.0, 0.0, true);
+        clear_test_piles(&mut game);
+        let waste = vec![Card::new(Deck::Deck1, Suit::Clubs, Rank::Two),
+                         Card::new(Deck::Deck1, Suit::Hearts, Rank::Five),
+                         Card::new(Deck::Deck1, Suit::Spades, Rank::Nine)];
+        game.set_test_waste_cards(waste.clone());
+
+        let top_index = waste.len() - 1; // 2 = the visible top
+        let top_pos = card_position(&game, &layout, &KlondikePile::Stock, top_index);
+        let result = find_draggable_at(top_pos, &game, &layout).expect("waste top is draggable");
+        assert_eq!(result.0, KlondikePile::Stock, "origin is the waste pile");
+        assert_eq!(result.1, top_index, "picks the top index, not the buffer");
+        assert_eq!(result.2, vec![waste[top_index].clone()], "drags the top card only");
+    }
+
+    #[test]
+    fn find_draggable_picks_lone_waste_card() {
+        // "can't play the first card in the stock" — a waste of one card must
+        // still be draggable.
+        let mut game = GameState::new(42, DrawStockConfig::DrawOne);
+        let layout = compute_layout(Vec2::new(1280.0, 800.0), 0.0, 0.0, true);
+        clear_test_piles(&mut game);
+        let card = Card::new(Deck::Deck1, Suit::Diamonds, Rank::Ace);
+        game.set_test_waste_cards(vec![card.clone()]);
+
+        let pos = card_position(&game, &layout, &KlondikePile::Stock, 0);
+        let result = find_draggable_at(pos, &game, &layout).expect("lone waste card is draggable");
+        assert_eq!(result.0, KlondikePile::Stock);
+        assert_eq!(result.1, 0);
+        assert_eq!(result.2, vec![card]);
+    }
+
+    #[test]
+    fn draw_three_waste_hit_test_matches_render_fan_step() {
+        // Regression: the Draw-Three waste hit-test must use the same fan step as
+        // the renderer (`card_plugin::waste_fan_step`). The previous hard-coded
+        // `card_size.x * 0.28` matched the renderer only on desktop (column step =
+        // 1.25*cw); under tighter Android-style spacing the two drift and the top
+        // fanned card's click target lands on the card beneath it — so dragging
+        // the visible top card plays the wrong one.
+        let mut game = GameState::new(7, DrawStockConfig::DrawThree);
+        let mut layout = compute_layout(Vec2::new(1280.0, 800.0), 0.0, 0.0, true);
+
+        // Force tight (Android-like) column spacing: ~1.03 * card_width.
+        let cw = layout.card_size.x;
+        let base = layout.pile_positions[&KlondikePile::Stock];
+        let t1 = layout.pile_positions[&KlondikePile::Tableau(Tableau::Tableau1)];
+        layout.pile_positions.insert(
+            KlondikePile::Tableau(Tableau::Tableau2),
+            Vec2::new(t1.x + cw * 1.03, t1.y),
+        );
+
+        clear_test_piles(&mut game);
+        let waste = vec![
+            Card::new(Deck::Deck1, Suit::Clubs, Rank::Two),
+            Card::new(Deck::Deck1, Suit::Hearts, Rank::Five),
+            Card::new(Deck::Deck1, Suit::Spades, Rank::Nine),
+            Card::new(Deck::Deck1, Suit::Diamonds, Rank::King),
+        ];
+        game.set_test_waste_cards(waste.clone());
+
+        // visible_start = len-3 = 1, so the top card sits at fan slot 2.
+        let top_index = waste.len() - 1;
+        let pos = card_position(&game, &layout, &KlondikePile::Stock, top_index);
+
+        let expected = base.x + 2.0 * waste_fan_step(&layout);
+        assert!(
+            (pos.x - expected).abs() < 1e-3,
+            "hit-test must use the shared waste fan step"
+        );
+        // The old fixed constant would have drifted from the renderer here.
+        let old = base.x + 2.0 * cw * 0.28;
+        assert!(
+            (pos.x - old).abs() > 1.0,
+            "shared step must differ from the old fixed step under tight spacing"
+        );
+    }
+
     #[test]
     fn find_draggable_skips_face_down_cards() {
         let game = GameState::new(42, DrawStockConfig::DrawOne);

solitaire_engine/src/layout.rs

@@ -7,6 +7,7 @@ use std::collections::HashMap;
 
 use bevy::math::Vec2;
 use bevy::prelude::{Resource, SystemSet};
+use solitaire_core::game_state::GameState;
 use solitaire_core::{Foundation, KlondikePile, Tableau};
 
 /// Schedule labels for layout-related systems so cross-plugin ordering is
@@ -91,6 +92,15 @@ const TABLEAU_FACEDOWN_FAN_FRAC: f32 = 0.14;
 /// this column inside the visible window.
 const MAX_TABLEAU_CARDS: f32 = 13.0;
 
+/// Upper bound for the dynamic tableau fan step (fraction of card height) chosen
+/// by [`apply_dynamic_tableau_fan`]. The fan is spread to fill the available
+/// height, but a near-empty column has tiny demand, so without a cap its few
+/// cards would fling far apart on a tall viewport. At 0.6 the face-up cards keep
+/// clear overlap (a readable stack) while still filling most of a near-square /
+/// unfolded-foldable screen. Tunable purely for feel — no effect on correctness
+/// or hit-testing.
+pub(crate) const MAX_DYNAMIC_FAN_FRAC: f32 = 0.9;
+
 /// Vertical pixel band reserved at the top of the play area for the HUD
 /// (action buttons, Score / Moves / Timer readouts). The card grid starts
 /// below this band so the HUD doesn't bleed into the play surface.
@@ -275,13 +285,12 @@ pub fn compute_layout(
         );
     }
 
-    // Adaptive tableau fan fraction. On height-limited (desktop) windows the
-    // height-based sizing already ensures a worst-case 13-card column fits at
-    // TABLEAU_FAN_FRAC (0.25), so the formula returns ≈0.25 and the clamp
-    // keeps it there — no change from prior behaviour. On width-limited
-    // (portrait phone) windows card_size is small and lots of vertical space
-    // is unused; we solve for the fraction that exactly fills the available
-    // space to the bottom margin.
+    // Adaptive tableau fan fraction. On height-limited windows the height-based
+    // sizing already ensures a worst-case 13-card column fits at TABLEAU_FAN_FRAC,
+    // so the formula returns the minimum and the clamp keeps it there. On
+    // width-limited (portrait phone) windows card_size is small and lots of
+    // vertical space is unused; solve for the fraction that fills the available
+    // space. `apply_dynamic_tableau_fan` later refines this for the actual deal.
     //
     // avail = distance from the top of the first tableau card to the bottom
     //         margin — i.e. the space available for 12 fan steps.
@@ -292,20 +301,87 @@ pub fn compute_layout(
     } else {
         TABLEAU_FAN_FRAC
     };
-    // Never go below the desktop minimum — avoids shrinking the fan on
-    // degenerate near-square windows where the formula might undershoot.
     let tableau_fan_frac = ideal_fan_frac.max(TABLEAU_FAN_FRAC);
-    // Scale the face-down fraction proportionally so rendering and hit-testing
-    // stay in sync (TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC = 0.48 ratio).
     let facedown_scale = TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC;
     let tableau_facedown_fan_frac = tableau_fan_frac * facedown_scale;
+    let available_tableau_height = avail;
 
     Layout {
         card_size,
         pile_positions,
         tableau_fan_frac,
         tableau_facedown_fan_frac,
-        available_tableau_height: avail,
+        available_tableau_height,
+    }
+}
+
+/// Spread the tableau fan so the deepest column fills the available vertical
+/// height for the *current* deal, mutating `layout.tableau_fan_frac` and its
+/// face-down companion in place.
+///
+/// `compute_layout` is pure geometry and sizes the fan for a worst-case 13-card
+/// column, so early in a game (shallow columns) a tall or near-square viewport
+/// — e.g. an unfolded foldable — is left with a large empty band below the
+/// tableau. This refines the fan once the actual deal is known.
+///
+/// Depth is measured across *all* cards in a column, each face-down card
+/// weighted by the fixed face-down/face-up step ratio. Counting the face-down
+/// portion (not just the face-up tail) is what fills the lower screen on a fresh
+/// deal, where the deepest column is several face-down cards under one face-up
+/// one. Deeper columns drive the fraction down so everything still fits;
+/// [`TABLEAU_FAN_FRAC`] floors it and [`MAX_DYNAMIC_FAN_FRAC`] caps it.
+///
+/// Called from card-sync at startup and on every `StateChangedEvent`, and from
+/// the resize pipeline after `compute_layout`, so the cold-start deal, ongoing
+/// play, and fold/unfold all stay filled. `card_position` / `card_positions`
+/// read the same fractions, so rendering and hit-testing remain in sync.
+pub(crate) fn apply_dynamic_tableau_fan(game: &GameState, layout: &mut Layout) {
+    let card_h = layout.card_size.y;
+    let avail = layout.available_tableau_height;
+    if card_h <= 0.0 {
+        return;
+    }
+
+    let facedown_ratio = TABLEAU_FACEDOWN_FAN_FRAC / TABLEAU_FAN_FRAC;
+
+    // "Step demand" of a column: the vertical offset of its bottom card from its
+    // top card, in units of the face-up fan step. Every card except the last
+    // contributes one step, weighted down to `facedown_ratio` while face-down.
+    let max_demand = [
+        Tableau::Tableau1,
+        Tableau::Tableau2,
+        Tableau::Tableau3,
+        Tableau::Tableau4,
+        Tableau::Tableau5,
+        Tableau::Tableau6,
+        Tableau::Tableau7,
+    ]
+    .into_iter()
+    .map(|tableau| {
+        let pile = game.pile(KlondikePile::Tableau(tableau));
+        let steps = pile.len().saturating_sub(1);
+        pile.iter()
+            .take(steps)
+            .map(|(_, face_up)| if *face_up { 1.0 } else { facedown_ratio })
+            .sum::<f32>()
+    })
+    .fold(0.0_f32, f32::max);
+
+    // No fannable column (every tableau pile has ≤ 1 card) — leave the fractions
+    // at the values compute_layout set.
+    if max_demand <= 0.0 {
+        return;
+    }
+
+    let ideal = avail / (max_demand * card_h);
+    let new_frac = ideal.clamp(TABLEAU_FAN_FRAC, MAX_DYNAMIC_FAN_FRAC);
+    let new_facedown_frac = new_frac * facedown_ratio;
+
+    if (layout.tableau_fan_frac - new_frac).abs() > 1e-4 {
+        layout.tableau_fan_frac = new_frac;
+    }
+    if (layout.tableau_facedown_fan_frac - new_facedown_frac).abs() > 1e-4 {
+        layout.tableau_facedown_fan_frac = new_facedown_frac;
     }
 }
 

solitaire_engine/src/table_plugin.rs

@@ -11,7 +11,9 @@ use solitaire_core::Suit;
 
 use crate::events::{HintVisualEvent, StateChangedEvent};
 use crate::hud_plugin::HudVisibility;
-use crate::layout::{Layout, LayoutResource, LayoutSystem, TABLE_COLOUR, compute_layout};
+use crate::layout::{
+    Layout, LayoutResource, LayoutSystem, TABLE_COLOUR, apply_dynamic_tableau_fan, compute_layout,
+};
 use crate::resources::GameStateResource;
 use crate::safe_area::SafeAreaInsets;
 use crate::settings_plugin::{SettingsChangedEvent, SettingsResource};
@@ -348,12 +350,13 @@ fn spawn_pile_markers(commands: &mut Commands, layout: &Layout) {
     }
 }
 
-#[allow(clippy::type_complexity)]
+#[allow(clippy::type_complexity, clippy::too_many_arguments)]
 fn on_window_resized(
     mut events: MessageReader<WindowResized>,
     safe_area: Option<Res<SafeAreaInsets>>,
     windows: Query<&Window>,
     hud_vis: Option<Res<HudVisibility>>,
+    game: Option<Res<GameStateResource>>,
     mut layout_res: Option<ResMut<LayoutResource>>,
     mut backgrounds: Query<
         (&mut Sprite, &mut Transform),
@@ -370,7 +373,16 @@ fn on_window_resized(
     let safe_area_top = insets.top / scale;
     let safe_area_bottom = insets.bottom / scale;
     let hud_visible = hud_vis.as_deref().copied().unwrap_or_default() == HudVisibility::Visible;
-    let new_layout = compute_layout(window_size, safe_area_top, safe_area_bottom, hud_visible);
+    let mut new_layout = compute_layout(window_size, safe_area_top, safe_area_bottom, hud_visible);
+
+    // compute_layout sizes the fan for a worst-case column; refine it to the
+    // current deal so a resize (incl. the Android safe-area-inset resize that
+    // fires in the first few frames, and fold/unfold on foldables) keeps the
+    // tableau filling the viewport instead of snapping back to the sparse
+    // worst-case fan.
+    if let Some(game) = game.as_ref() {
+        apply_dynamic_tableau_fan(&game.0, &mut new_layout);
+    }
 
     if let Some(layout_res) = layout_res.as_deref_mut() {
         layout_res.0 = new_layout.clone();

solitaire_server/web/pkg/canvas.js

@@ -1649,62 +1649,62 @@ function __wbg_get_imports() {
             return ret;
         },
         __wbindgen_cast_0000000000000001: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Externref], shim_idx: 114855, ret: Result(Unit), inner_ret: Some(Result(Unit)) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Externref], shim_idx: 114846, ret: Result(Unit), inner_ret: Some(Result(Unit)) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__hea4b5125da4e5ded);
             return ret;
         },
         __wbindgen_cast_0000000000000002: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Externref], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Externref], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e);
             return ret;
         },
         __wbindgen_cast_0000000000000003: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Array<any>"), NamedExternref("ResizeObserver")], shim_idx: 9847, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Array<any>"), NamedExternref("ResizeObserver")], shim_idx: 9838, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h0fec466277fb30e8);
             return ret;
         },
         __wbindgen_cast_0000000000000004: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Array<any>")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Array<any>")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_3);
             return ret;
         },
         __wbindgen_cast_0000000000000005: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Event")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("Event")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_4);
             return ret;
         },
         __wbindgen_cast_0000000000000006: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("FocusEvent")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("FocusEvent")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_5);
             return ret;
         },
         __wbindgen_cast_0000000000000007: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("KeyboardEvent")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("KeyboardEvent")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_6);
             return ret;
         },
         __wbindgen_cast_0000000000000008: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("PageTransitionEvent")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("PageTransitionEvent")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_7);
             return ret;
         },
         __wbindgen_cast_0000000000000009: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("PointerEvent")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("PointerEvent")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_8);
             return ret;
         },
         __wbindgen_cast_000000000000000a: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("WheelEvent")], shim_idx: 9841, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [NamedExternref("WheelEvent")], shim_idx: 9832, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h2a0b90ad2a013a3e_9);
             return ret;
         },
         __wbindgen_cast_000000000000000b: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Option(NamedExternref("Blob"))], shim_idx: 9843, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [Option(NamedExternref("Blob"))], shim_idx: 9834, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__hf05069bc44820cc5);
             return ret;
         },
         __wbindgen_cast_000000000000000c: function(arg0, arg1) {
-            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [], shim_idx: 9839, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
+            // Cast intrinsic for `Closure(Closure { owned: true, function: Function { arguments: [], shim_idx: 9830, ret: Unit, inner_ret: Some(Unit) }, mutable: true }) -> Externref`.
             const ret = makeMutClosure(arg0, arg1, wasm_bindgen__convert__closures_____invoke__h5e26b448f43bfba9);
             return ret;
         },